Triple Compression Super Baler Turn Out

Technical Specifications :

BALING CHAMBER	24" X 30" X 57" (H X W X L)
BALE SIZE	12" X 12" X 5-8" (H X W X L)
ELECTRIC MOTOR	30 H.P 3 PHASE 1440 RPM
BODY	FABRICATED
OIL DRIVE	GEAR CUM AXIAL PISTON PUMP
WORKING LIQUID	HYDRO/ENCLO-68 (NOT IN OUR SCOPE)
FORCE ON LID CYLINDER	40 TONS
FORCE ON MAIN CYLINDER	75 TONS
FORCE ON SIDE CYLINDER	120 TONS
FORCE ON EJECTOR CYLINDER	12 TONS
WORKING PRESSURE	3000 PSI
HARD LINER PLATES	PROVIDED
SHEARING BLADES	PROVIDED
STARTER	PROVIDED
WEIGHT OF THE BALE	50-80  KGS (IN MS) 20-30 KGS (Aluminium)
IDLE CYCLE TIME	75 - 80 SECONDS (APPROX)
WEIGHT OF THE MACHINE	7 TONS (APPROX)
OIL TANK CAPACITY	600 LTS.
OPERATION OF THE MACHINE	MANUAL THROUGH LEVERS

Triple Compression Mini Baler

Technical Specifications :

BALING CHAMBER	20" x 20" x 45" (W x H x L)
BALE SIZE	10" x 10" x “8-10"  (W x H x L)
ELECTRIC MOTOR	25  HP  3PHASE 1440 RPM
OIL DRIVE	PLUNGER PUMP
WORKING LIQUID	HYDRO/ENCLO-68 (NOT IN OUR SCOPE)
FORCE ON LID CYLINDER	40 TONS
FORCE ON MAIN CYLINDER	75 TONS
FORCE ON SIDE CYLINDER	85 TONS
FORCE ON EJECTOR CYLINDER	18 TONS
TYPE OF EJECTION	TOP EJECTION
WORKING PRESSURE	3300 PSI
WEIGHT OF THE BALE	40-60 KGS (IN MS)
IDLE CYCLE TIME	85 - 90 SECONDS(APPROX)
OIL TANK CAPACITY	500LTS.
WEIGHT OF THE MACHINE	5000 KG. (APPROX)

TRIPLE COMPRESSION JUMBO PLUS TOP EJECTION

Triple Compression Jumbo Plus Top Ejection

Technical Specifications :

BALING CHAMBER	40" x 48" x 84" (H x W x L)
BALE SIZE	20" x 20" x 10-20" (H x W x L)
ELECTRIC MOTOR	2 x 40 H.P. 3 PHASE 1440 RPM
BODY	FABRICATED
OIL DRIVE	GEAR CUM PLUNGER PUMP
WORKING LIQUID	HYDRO/ENCLO- 68 (NOT IN OUR SCOPE)
FORCE ON LID CYCLINDER	120 TONS (60 X 2)
FORCE ON MAIN CYLINDER	200 TONS (100 X 2)
FORCE ON SIDE CYCLINDER	170 TONS
THICKNESS OF THE PRESSURE PLATE	24"
FORCE ON EJECTOR CYCLINDER	12 TONS
TYPE OF EJECTION	TOP EJECTION
WORKING PRESSURE	3300 PSI
HARD LINER PLATES	PROVIDED
SHEARING BLADES	PROVIDED
STARTERS	PROVIDED 2 NOS.
WEIGHT OF  THE BALE	150 - 240 KGS.
IDLE CYCLE TIME	100 SECONDS (APPROX)
WEIGHT OF THE MACHINE	25 TONS (APPROX)
OIL TANK CAPACITY	1800 LTS.
OPERATION	BY CONTROL DESK WITH PLC CONTROL SECOND VALVES, PROXIMITY, PRESSURE SWITCHES ETC.)

TRIPLE COMPRESSION JUMBO TURNOUT AUTO

TECHNICAL SPECIFICATIONS:

BALING CHAMBER	30" x 38" x 74" (H x W x L)
BALE SIZE	15" x 15" x 10-20" (H x W x L)
ELECTRIC MOTOR	50 H.P. 3 PHASE 1440 RPM
BODY	FABRICATED
OIL DRIVE	AXIAL PISTON AND VANE PUMP (BOTH IMPORTED)
WORKING LIQUID	HYDRO/ENCLO - 68 (NOT IN OUR SCOPE)
FORCE ON LID	75 TONS
FORCE ON MAIN CYLINDER	100 TONS
FORCE ON SIDE CYCLINDER	150 TONS
FORCE ON EJECTOR CYCLINDER	11 TONS
WORKING PRESSURE	4000 PSI
HARD LINER PLATES	PROVIDED
SHEARING BLADES	PROVIDED
STARTER PANEL	PROVIDED
ONLINE OIL CHILLER	PROVIDED
WEIGHT OF  THE BALE	60 - 120 KGS (IN M.S) & 25 - 50 KGS (IN ALUMINIUM).
IDLE CYCLE TIME	70 - 75 SECONDS (APPROX)
WEIGHT OF THE MACHINE	12.5 TONS (APPROX)
OIL TANK CAPACITY	1,200 LTS.
EJECTION OF BALE	TURNOUT TYPE
OPERATION OF MACHINE	AUTO CYCLE THROUGH PUSH BUTTON
OVERALL DIMENTIONS	7' X 9' X 20 (H X W X L) (APPROX)

Triple Compression Jumbo Top Ejection Baler

 Triple compression balers are used for reducing three dimensions of the scrap material by using hydraulic force from three angle


Triple compression balers are used for reducing three dimensions of the scrap material by using hydraulic force from three different angles. The two horizontal cylinders are arranged at right angles to each other. Vertical reduction generally takes place by hydraulic pressure on the lid cylinder. One of the horizontal cylinders presses the scrap against the ejection door of the baler. This door is raised hydraulically after baling is complete. The bundle is then removed from the chamber by horizontal cylinder.

Our organization offers an extensive range of Triple Compression Balers - Jumbo Plus Turnout Type. These machines are provided with electric motor, baling chamber, shearing blades and oil cleaning unit, which ensures optimum functionality. Triple Compression Balers can extrude the material into a certain kind of shape or size. These machines are simple and reliable in operation and require low energy consumption.

Technical Specifications :

BALING CHAMBER	20" x 20" x 45" (W x H x L)
BALE SIZE	10" x 10" x “8-10"  (W x H x L)
ELECTRIC MOTOR	25  HP  3PHASE 1440 RPM
OIL DRIVE	PLUNGER PUMP
WORKING LIQUID	HYDRO/ENCLO-68 (NOT IN OUR SCOPE)
FORCE ON LID CYLINDER	40 TONS
FORCE ON MAIN CYLINDER	75 TONS
FORCE ON SIDE CYLINDER	85 TONS
FORCE ON EJECTOR CYLINDER	18 TONS
TYPE OF EJECTION	TOP EJECTION
WORKING PRESSURE	3300 PSI
WEIGHT OF THE BALE	40-60 KGS (IN MS)
IDLE CYCLE TIME	85 - 90 SECONDS(APPROX)
OIL TANK CAPACITY	500LTS.
WEIGHT OF THE MACHINE	5000 KG. (APPROX)

 See Video of the Machine

More Details visit here:http://ww.advancehydrautech.in/
http://www.advancehydrautech.com/